Watchguard Firebox X1000 Betriebsanweisung PDF herunterladen (Seite 77)

Adding Basic Services to Policy Manager

User Guide 61

Removing a subnet

You can remove an existing subnet; however, you should be aware that

doing so can cause problems. If you remove the subnet and then reboot

the client, the Firebox may return an IP address that does not work with

certain devices or services. From Policy Manager:

1 Select N e t w o r k => DHCP Server.

2 Click the subnet to remove it. Click Remove.

3 Click OK.

Adding Basic Services to Policy Manager

After you have set up IP addressing, add the following services to Policy

Manager to give your Firebox some basic functionality.

OTE

The WatchGuard service is particularly important. If you omit it from

your configuration or misconfigure it, you will lock yourself out of the

Firebox.

1 On the Policy Manager toolbar, click the Add Services

icon (shown at right).

2 Click the plus (+) sign to the left of the Packet Filters

and Proxies folder to expand them.

A list of pre-configured filters or proxies appears.

3 Under Packet Filters, click WatchGuard.

4 Click the Add button at the bottom of the dialog box.

5 Click OK in the Add Service dialog box.

6 Click OK to close the Properties dialog box.

7 Repeat steps 3—7 for the Ping, FTP, and Outgoing services.

At this stage, do not change the default settings for any of these basic

services. The default settings allow all traffic outbound and deny all

traffic inbound. Later, you can go back and modify the services in Policy

Manger to best fit your security needs.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 270 271

Keine Kommentare

Watchguard Firebox X1000 Betriebsanweisung Seite 77