Watchguard Firebox X5-W Betriebsanweisung Seite 51

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 234
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 50
User Guide 35
Configuration and Management Basics
The Firebox X Edge restart cycle is approximately one minute. During the restart cycle, the mode indica-
tor on the front of the Edge turns off and then turns on again.
Local restart
You can locally restart the Firebox X Edge e-Series using one of two methods: use the web browser, or
disconnect the power supply.
Using the web browser
1 To connect to the System Status page, type https:// in the browser address bar, and then the IP
address of the Firebox X Edge trusted network interface.
The default URL is: https://192.168.111.1
2 Click Reboot.
Disconnecting the power supply
Disconnect the Firebox X Edge power supply. Wait for a minimum of 10 seconds, and then connect the
power supply.
Remote reboot
You must configure the Firebox X Edge e-Series to allow incoming HTTPS traffic to the Edge trusted
interface IP address if the computer is not on the trusted interface. For more information on how to con-
figure the Edge to receive incoming traffic, see “Configuring Incoming Services” on page 78. After
HTTPS traffic is allowed, you can remotely manage your Edge using your browser from a trusted IP
address. To do a remote reboot:
1 To connect to the System Status page, type https:// in the browser address bar, and then the IP
address of the Firebox X Edge external interface.
2 Click Reboot.
Setting the System Time
For each log message, the Firebox® X Edge e-Series records the time from its system clock. The Edge
uses NTP to get the correct time automatically. You can change the NTP server that the Edge uses, or
you can set the system time manually.
Seitenansicht 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 233 234

Kommentare zu diesen Handbüchern

Keine Kommentare