Watchguard V2 Spezifikationen PDF herunterladen (Seite 26)

TO ADD A DETECTOR …continued…

Within 60 seconds

Press to add in STAY

& AWAY modes

Press to add in

AWAY mode only

Press to add in 24

hour mode

This option will

enable the detector in

both STAY and

AWAY modes.

This option will

disable the detector

in STAY mode

Use this option if

you are adding a

smoke detector.

The siren will beep 1

time as confirmation

of learning the last

triggered detector.

The siren will beep 2

times as

confirmation of

learning the last

triggered detector.

The siren will beep 3

times as

confirmation of

learning the last

triggered detector.

Walk Test mode

The system will automatically enter Walk Test mode.

During this time, the siren will beep the number of times

of the zone which has been triggered. Label the detector

with its zone number for future reference. Detectors

which have been set to 24 hour mode will still trigger the

alarm. If a tamper switch is pressed on the main unit or a

wireless detector the siren will sound a low tone beep.

Press to exit

When you press Button 2, the system will exit

programming and walk test mode. You have now

completed adding a new detector.

NOTE: Refer to (5) If you trigger a detector that is already learnt in you will hear one

low tone beep, simply trigger the correct detector until you hear the siren give the

normal zone confirmation beeps. You need to do step (6) after the correct detector has

been acknowledged, as it will keep accepting any unlearnt detector until step (6) is

done or it times out (60 seconds).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Watchguard V2 Spezifikationen Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Watchguard V2